|
Proxxon MF 70 CNC Package
Tabletop
Milling Machine with Three Axis CNC Retro-fit
"Perfectly sized for the corner of your desk"
A must have for Engineers, Opticians, Dentists, Jewelers,
Electronics Enthusiasts, Model Builders, and Hobbyists alike. Great for size
appropriate rapid prototyping, jewelry machining, mechanical pc board etching,
detailed engraving, and many other milling based activities.
From Proxxon's website:
(220-240 VAC units also available)
.pdf version (43KB)
Our CNC Conversion adds:
Includes Mach 3 DEMO version
CNC control software CD and .xml set-up file to get you started quickly. Also on
the CD is an electronic copy of the Mach 3 manual and a g-code file to engrave a
proper scale US flag @ 2" X 1". (Mach 3 DEMO limited to 1000 lines of
g-code)
Three axis step motor driver
unit with 4th axis capability included. Our step driver box is built around a
4-axis driver board allowing an upgrade to 4 axes with ease. See
below for 4 axis upgrade information.
External DC power supply
design allows for 4th axis upgrade and removes all AC componentry from inside of
the driver enclosure.
Three 83 oz/in bi-polar
parallel step motors allow rapid traverses at 20 Inches per minute (500mm/min)
while still providing more than enough power for milling and cutting functions
at appropriate speeds. Motors are equiped with 6' long cables and terminated
with a unified locking quick connect device.
Step motors are attached to
the machine with CNC machined aluminum mounts. Factory lead screws are retro-fit
with duplex roller-ball thrust bearings to eliminate bearing wear due to
repeatative CNC motion. Shaft couplings are pinned to the lead screw for precise
power transmission.
8th level micro-stepping
achieves mechanical resolution of .000025"
(.000635mm)
Utilizing a proper "turn
to release" style Emergency Stop switch, the operator is protected by an
industrial Master Control Power Relay style
circuit.
The unit accepts a standard
DB-25 parallel port cable. (included)
Manual Activation is not
possible with a CNC converted machine, although jogging functions are part of
Mach3 and can be used in place of manual
machining.
Upgrade
Options:
-
4 axis electronics: Option
includes power supply upgrade and internal wiring / panel connector for motor
attachment. This improvement DOES NOT include the mechanical fourth axis or
step motor, it completes the capability of the driver box only. Add $65.00 USD
-
4th Axis: Now
Available click HERE for more
details. Add $335.00
USD
-
Emergency Stop Relocation:
Our std offering has the E-stop and reset switches located on the driver box
requiring it to be within the operators reach at all times. This option
relocates the E-stop and reset buttons to the spindle head of the machine thus
enabling the driver box to be located out of sight. Add
$25.00 USD
-
Relay control box: Provides
two program controlled solid state relays that are circuit breaker protected.
Combined current draw must not exceed 15 Amps. Useful for spindle on/off
control and dust collection vacuum or spray mist solenoid/flood coolant pump.
(Inquire for a 220VAC relay box as it will require special
pricing.) 110VAC relay box Add$125.00
USD
-
Upgrade to precision
grooved race ball thrust bearings. Add $65.00
USD
-
Upgrade to helical beam
couplings. Add $60.00
USD
-
Upgrade to NEMA 23 step
motors. Quoted upon request.
-
Upgrade to Ball Screw
activation. Quoted upon request.
-
Servo Motors: Globe motors
offer 20 oz/in cont. and 170 oz/in peak torque. Max RPM = 2800. 500 count HEDS
encoder. SV-500 servo amps with 30V 5Amp capability. Upgraded power supply.
Add $475.00
USD
MF70 CNC SHOWN WITH OPTIONAL 4TH AXIS
Set-up documentation HERE
A
QuickTime Video
(5.5MB)
The finished
product.
Our Price: $1095.00
Normally Ships within 2 Weeks!!
We Welcome International Orders!!!
Order
HERE
 ALL RIGHTS RESERVED '08 KDN TOOL &
AUTOMATION ENGINEERING CO. LLC
You are here: Home-Complete Machines-MF70 CNC
Previous Topic: XJ-95 Next Topic: RTR-842
| 
