|
Height: 11.45" (290.83 mm)
Width: 7.40" (187.96 mm)
Length:12.50" (317.5 mm)
The Mini-Router alone weighs 16LBs
These units are handmade one at a time by WidgitMaster!"
...............................................................................................
(Picture shows option #3 installed)
Our CNC Components
Add:
Mach 3 DEMO
version CNC control software CD and .xml set-up file to get you started
quickly. Also on the CD is an electronic copy of the Mach 3 manual and a
g-code file to engrave a proper scale US flag @ 2" X 1". (Mach 3 DEMO
limited to 1000 lines of g-code)
Three axis step motor
driver unit with 4th axis capability included. Our step driver box is
built around a 4-axis driver board allowing an upgrade to
4 axes with ease. See below for 4 axis upgrade
information.
External DC power
supply design allows for 4th axis upgrade and removes all AC componentry
from inside of the driver enclosure.
Three 166 oz/in
bi-polar parallel step motors allow rapid traverses at 90 Inches per
minute while still providing more than enough power for milling and
cutting functions at appropriate speeds. Motors are equiped with 6' long
cables and terminated with a unified locking quick connect
device.
One Quarter
micro-stepping achieves mechanical resolution of .000125"
Utilizing a proper
"turn to release" style Emergency Stop switch, the operator is protected
by an industrial Master Control Power Relay style
circuit.
The unit accepts a
standard DB-25 parallel port cable.
(included)
Manual Activation is
not possible with this CNC converted machine, although jogging
functions are part of Mach3 and can be used in place of manual
machining.
The Spindle is a Proxxon IB/E professional grinder chosen
for it's reputation of powerful yet quiet operation, aluminum nose bearing
housing, continuous duty rating, and six interchangable triple slit
collets to hold a multitude of cutter
DIA's.
(Picture shows option
#3 installed)
 
(Electronics Shown with
STD Emergency Stop switch location)
Our Price: $1495.00
Order HERE
Upgrade Options:
-
4 axis electronics:
Option includes power supply upgrade and internal wiring / panel
connector for motor attachment. This improvement DOES NOT include the
mechanical fourth axis or step motor, it completes the capability of the
driver box only. Add $65.00
USD
-
4th Axis: Available
HERE Add $335.00 USD
-
Emergency Stop
Relocation: Our std offering has the E-stop and reset switches located
on the driver box requiring it to be within the operators reach at all
times. This option relocates the E-stop and reset buttons to the spindle
head of the machine thus enabling the driver box to be located out of
sight. Add $25.00
USD
-
Relay control box: Provides two program controlled solid
state relays that are circuit breaker protected. Combined current draw
must not exceed 15 Amps. Useful for spindle on/off control and dust
collection vacuum or spray mist solenoid/flood coolant pump. 110VAC relay box Add$125.00
USD
-
Upgrade to Ball Screw
activation. Quoted upon request.
-
Servo Motors: Globe
motors offer 20 oz/in cont. and 170 oz/in peak torque. Max RPM = 2800.
500 count HEDS encoder. SV-500 servo amps with 30V 5Amp capability.
Upgraded power supply. Add $475.00
USD
| 
ALL RIGHTS RESERVED '08 KDN TOOL &
AUTOMATION ENGINEERING CO. LLC