| Basic Open Loop Electronics : (3-axis)
- “Probotix” based 2.5 amp per phase (max) bi-polar
chopper drivers.
- Individual
driver for each axis allows easy replacement.
- For use with step motors.
- Remote
power supply included.(Universal 90-240VAC Input)(US cordset included)
- Standard DB-25 (parallel port) input from host
PC.
- Compatible with most CNC control software.(step and
direction output type) (EMC, TurboCNC, Mach2/3, etc)
- Master Control Relay style Emergency Stop circuit with
proper "turn to release" E-stop switch.
- Fuse protection of motor power
supply.
- Quick Disconnect motor cables for each
stepper.
- Detailed installation and set-up instructions
included.
 
3 Axis Pricing:
With 24VDC 2.2 Amp Supply
= $390.00
With 24VDC 3.0 Amp Supply =
$425.00
With 24VDC 6.5 Amp Supply =
$460.00
(2.2amp supply
is good for (3) 2.0amp/phase motors, 3.0 amp supply is good for (4) 2.0amp/phase
motors, and 6.5 amp supply is good for motors up to the max 2.5amp/phase
rating)
Shipping &
Handling: $10.00
Upgrade
Options:
-
4 axis electronics: Option
includes a fourth step driver, and internal wiring / panel connector for motor
attachment. This improvement DOES NOT include the mechanical fourth axis or
step motor, it completes the capability of the driver box only. Add $60.00
USD
- Relay control box: Provides
two program controlled solid state relays that are circuit breaker protected.
Combined current draw must not exceed 15 Amps. Useful for spindle on/off
control and dust collection vacuum or spray mist solenoid/flood coolant pump.
(Inquire for a 220VAC relay box as it will require special
pricing.) 110VAC relay box Add$145.00
USD
Ordering
Terms:
$200.00 Deposit to begin manufacturing.
Balance due prior to shipment.
Controller will ship 2-3 weeks after deposit is
placed.
Shipping charges noted above are for Domestic UPS ground
delivery.
Due to the nature of sensitive electronics and electrical
components
customer will have ten (10) days from date of receipt
to return
step controller, in full
functional condition, for a full refund less shipping charges.
After ten (10) day period expires, and up to ninety (90) days
from receipt of goods, any malfunction will be repaired at KDN Tool's expense.
Thereafter any any necessary repairs will be done at the customers expense.
Return shipping charges are customers responsibility.
 ALL RIGHTS RESERVED '09 KDN TOOL &
AUTOMATION ENGINEERING CO. LLC
You are here: Home-Electronics-Basic
Next Topic: Step Motors
| 
