Triple Function Stepper Drive / Indexer / Constant Motion Solution!

Price: $225.00 with 276oz/in NEMA 23 stepper

 $175.00 without motor                

Features:

• Bipolar constant current chopper style step motor driver
• 3 amp per phase max current limit*
• Full, half, quarter, eighth, and 1/10 microstepping levels*
• Accepts industry standard Step & Direction signals
• Independent internal 1-20KHz step pulse generator
• Independent direction selector switch for use with internal pulse generator
• Built-In 45 VDC motor power supply
• Available with or without a stepping motor

Functions:

• Unit can function as a CNC software controlled 45VDC step motor driver and a stand-alone step driver with its internal step pulse generator.
• Provides software commanded CNC control as well as independent single axis power feed or constant rotary motion functionality.
• Especially useful with a fourth axis should you require constant rotary motion in either direction.
• Functions as a fourth axis indexer when used with CNC control software.
• Simple add-on to an existing three axis CNC mill. Just connect the step, direction, and ground signals to your controller and off you go.

*Current limit and step / micro step level are factory pre-set and must be specified at time of ordering.

THIS UNIT DOES NOT OFFER ANY TYPE OF EMERGENCY STOP CIRCIUITY BUILT IN TO IT. IT IS THE CUSTOMERS RESPONSIBILITY TO PROVIDE ADEQUATE E-STOP INTEGRATION AND PURCHASE OF THIS ITEM SHALL BE ALIGNED WITH THOSE TERMS.

Passive Communication Distribution Block

Price: $40.00

Features:

• Passive communication from PC to axes and I/O devices
• Standard DB-25 interface connector
• 4 axis step / dir / gnd cables with locking quick disconnects*
• Terminal blocks for integration with peripheral I/O devices
• Small form factor permits various locating options
• Does Not require and external power supply

*Desired axis wiring pin-out must be specified at time of order

You are here: Home-Electronics-Modular

Previous Topic: PWM-10VDC Next Topic: Pinnacle