1. HAND WHEEL SERVES AS BOTH HEIGHT ADJUSTMENT AND FINE MILL FEED.
2. POLY-V DRIVE SYSTEM OFFERS 6 SPEEDS BETWEEN 280 AND 2500 RPM.
3. THE CLAMPS AND WORKPIECE SHOWN ARE NOT INCLUDED.
4. HAND WHEELS WITH ZERO ADJUSTABLE SCALE, 1 REV=1MM (.0393701"), 1 DIV = .05MM (.00197")

The micro mill FF230 is a small, accurate milling system used to mill, drill, and countersink steel, cast iron, aluminum, brass, and plastic. The headstock swivels through 360 degrees, indicated on a scale. Height is adjusted via a zero adjustable hand wheel, also used as a fine feed when milling. One revolution equals 1 millimeter of travel, 1 division equals .05 milimeter. The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yeilding high torques, especially at lower speeds. The machine comes with three collets of 6,8,10mm. The solid table has a size of 270 X 80mm and is T-slotted to 12X6X5mm.

Technical Data:

Speeds = 280,550,870,1250,1700,2500 RPM

Table Size = 270 X 80mm (10.625 X 3.156)

Column Size = 35mm DIA X 400mm long (1.375 DIA X 15.75" long)

X-Y Travel = 170 X 65mm (6.688 X 2.563")

Overall Height = 500mm (20")

Volts = 110 - 120 VAC 60Hz

Weight = 41 Lbs

 

 

 

Our Price: $1190.00 USD

(MSRP $1547.00)

 

 

 

 ALL RIGHTS RESERVED '09 KDN TOOL & AUTOMATION ENGINEERING CO. LLC

You are here: Home-Proxxon-FF 230 Mill

Previous Topic: KT-150